Enamelled Wire

Application

Submersible Winding Wires are used in submersible pumps motors of all sizes for domestic and industrial application.

Description

We also offer poly wrapped winding wire commonly known as “Submersible Copper Winding Wire”. The copper conductor is wrapped with thin polyester film and Biaxial oriented poly propylene (BOPP) films. The most modern plant with sophisticated wrapping heads and in line continuous heat shrinkage furnace is installed to get uniform covering. A complete quality assurance testing by instruments covering all governing standards is available.

KEY PERFORMANCE CHARACTERISTICS

	On Finished Wire
Volume Resistivity at 27°C	1 x 1016 ohms-com
Tensile Strength (min)	50 N/mm2
Elongation at Break (min)	125%

Water absorption (Gravimetric)

Treatment Temperature (±2°C)	70°C for 24 hours
Water absorbed (max)	2 mg/cm2

FLIPCAB WINDING WIRES FOR SUBMERSIBLE PUMP MOTORS

Nominal Conductor Diameter	Max Over all Diameter	Area of Conductor	Nominal Resistance	Elongation at Break
mm	mm	mm2	Ω per meter at 20° C	Minimum %
0.40	0.9000	0.1257	0.1360	24
0.50	1.0000	0.1964	0.0871	25
0.60	1.1000	0.2828	0.0605	26
0.70	1.2000	0.3849	0.0444	28
0.80	1.3000	0.5027	0.0340	28
0.90	1.4000	0.6363	0.0269	29
1.00	1.5000	0.7855	0.0218	30
1.10	1.6000	0.9505	0.0180	30
1.20	1.7000	1.1311	0.0151	31
1.30	1.8000	1.3275	0.0129	32
1.40	2.0000	1.5396	0.0111	32
1.50	2.1000	1.7674	0.0097	32
1.60	2.2000	2.0109	0.0085	32
1.70	2.3000	2.2701	0.0075	32
1.80	2.4000	2.5450	0.0067	32
1.90	2.5000	2.8357	0.0060	32
2.00	2.6000	3.1416	0.0055	33
2.10	2.7000	3.4641	0.0049	33
2.20	2.8000	3.8018	0.0045	33
2.30	3.1000	4.1553	0.0041	33
2.40	3.2000	4.5245	0.0038	33
2.50	3.3000	4.9094	0.0035	33